Floor sealer /polish has excellent durability with an off  the mop gloss that demonstrates high clarity.  It is easy to apply and has excellent adhesion and resistance to heel marks and scuffs.  Ideal for spray buffing.

DIRECTIONS: Remove old sealer using Supreme Supa-Stripper.

Apply 3-4 coats of Supreme floor sealer/polish using a clean synthetic mop or applicator and a clean bucket. Allow each coat to dry thoroughly. Approx 20-45 minutes per coat, depending on temperature and humidity.

MAINTENANCE:

Sweep or dust mop as necessary.

Damp mop or auto scrub as needed.

Dry buff or spray buff to enhance gloss.

PRECAUTIONS:

Do not Burnish floor within 24 hours of last coat.

Do not dilute.

Do not return unused product to original container.

Do not use on surface colder than 7 degrees C.

Coverage—1 Litre approx 50 square metres.

Meets the dry slip requirements of AU/NZS 3661.1

FIRST AID: If  in  eyes , hold eyes open, flush with water for 15 minutes and see a doctor if irritation persists. If skin contact, wash with soap and water and as above.

Available in:    5 Litre  20 Litre